QCE Physics - Unit 2 - Linear motion and force

Momentum, impulse and one-dimensional collisions

Learn momentum and impulse for QCE Physics Unit 2 with worked reasoning, equations, original diagrams and checked practice.

Part of the free QCE Physics notes library for Unit 2: Linear motion and force.

Updated 2026-08-09 - 7 min read

Use impulse and signed momentum conservation to analyse collisions and force-time data. This note is designed for active learning: predict the physical outcome before calculating, state the system and assumptions, and then use an equation or diagram to make the reasoning testable. Physics becomes reliable when words, signs, graphs, units and energy or momentum ledgers all tell the same story.

The physical model

Momentum is a signed vector quantity $mv$. Impulse is the change in momentum and equals the signed area under a force-time graph. Total momentum of an isolated system is conserved even when individual objects exchange large forces.

A useful physics model deliberately leaves some features out. Before using it, name the system boundary, the time interval and the conditions that make the relationship appropriate. For a thermal problem this may mean negligible energy loss; for a circuit it may mean ideal wires and meters; for motion it may mean one dimension or constant acceleration; for a wave it may mean a uniform medium. An assumption is not a weakness when it is visible and justified. It becomes a problem only when the conclusion is extended beyond the model's conditions.

Physics explanations should form a causal chain: identify the interaction or energy transfer, state the relevant change, connect it to the mathematical relationship, then describe the observable consequence. Avoid replacing that chain with a label such as "because of inertia", "because heat rises" or "because waves bend". The label names the topic; the chain explains it.

Governing relationships

$ p=mv $

$ J=\Delta p=F_{\mathrm{avg}}\Delta t $

$ \sum p_{\mathrm{before}}=\sum p_{\mathrm{after}} $

Write the relationship before substituting numbers. Define the sign convention and translate every value into SI units unless the equation or data book clearly permits another unit. A negative answer can represent direction or a decrease; it is not automatically an arithmetic error. A positive magnitude without a stated direction can still be incomplete.

Check dimensions before accepting an answer. Joules, watts, volts, newtons and pascals are compact descriptions of base-unit relationships, not decorative labels. If the units do not reduce to the requested quantity, the calculation cannot be correct even when the calculator work is flawless.

Build the concept connections

1. Interpret the model

Conservation applies to the chosen system when external impulse is negligible. Internal collision forces are equal and opposite and cancel in the system total.

2. Connect the evidence

Increasing stopping time for the same momentum change reduces average force. This is the physics behind crumple zones, airbags and follow-through.

3. Protect the boundary conditions

A force-time graph can be triangular, rectangular or composite. Its area includes the sign relative to the chosen direction.

The diagram above is a reasoning tool rather than decoration. Recreate it from memory and annotate the invariant quantities, the quantities that change and the boundary conditions. If the context changes, ask which arrows, graph regions or force labels must change. That comparison is often the fastest route through an unfamiliar question.

A repeatable method

1. Define the system and positive direction before assigning velocities.
2. Create before and after momentum totals with signs and units.
3. Apply conservation only after checking external impulse is negligible.
4. Use force-time area for impulse and verify it matches the system momentum change.

This sequence is a scaffold, not a sentence template. A short numerical response may compress several decisions into one line, while an investigation or explanation must keep the evidence visible. Do not substitute until the system, direction and model have been chosen. Preserve unrounded intermediate values and round only the final result to precision supported by the supplied data.

Worked example

Cover the steps and reproduce the solution from the problem statement. Then change one condition: reverse a direction, double a quantity, introduce a loss, change the boundary or swap a series connection for a parallel one. Predict the effect before recalculating. This counterfactual check exposes whether the method is understood or merely copied.

Experimental and graphical reasoning

Physics data are measurements with uncertainty, not exact copies of equations. Start by reading both axes, units and scale. Decide whether the useful information is a point value, intercept, gradient, area or curve shape. Quote processed evidence when it supports a claim, but always explain the physical meaning of that evidence.

A gradient should be found from well-separated points on a best-fit line rather than two convenient raw points. Where minimum and maximum plausible lines are available, compare their gradients to estimate uncertainty. An area must include the graph's units and sign. A straight line through the origin can support proportionality only when the uncertainty and physical model make a non-zero intercept implausible.

Repeated trials reveal random variation and allow averaging, but they do not remove a systematic offset, energy leak, miscalibrated sensor or consistently wrong zero. Improve validity by changing the method so the dependent variable genuinely measures the stated construct and the relevant confounding variables are controlled. Improve reliability through repeatable procedures and sufficient measurements.

When evaluating evidence, separate the observed pattern from the inference. State a limitation by explaining its likely direction and consequence: for example, energy transferred to the surroundings makes an ideal calorimetry value too low, or uncorrected background count makes a decay reading too high. "Human error" is rarely specific enough to guide an improvement.

Common mistake and repair

The repair matters because an answer can contain a familiar formula and still use the wrong physical model. Before moving on, audit direction, conservation, units and limiting behaviour. Ask what should happen if a key quantity becomes zero, doubles or grows very large. A result that violates that prediction needs investigation.

Practice and verification

Now attempt the second check without returning to the worked example:

• Why does an airbag reduce average force for a given momentum change?

Then attempt this unfamiliar transfer:

• A stationary object explodes into two fragments. One has momentum $+12,\mathrm{kg,m,s^{-1}}$. What is the other's momentum if external impulse is negligible?

For each answer, add one verification sentence. Suitable checks include a reverse substitution, a conservation ledger, graph-area units, an independent equation, a limiting case or a qualitative prediction of direction and scale.

Assessment transfer

For safety devices, connect longer interaction time to smaller average force at the same impulse without claiming the momentum change disappears.

In a QCAA-style response, match the cognitive verb. Describe the relevant features accurately. Explain the causal relationship. Analyse patterns, relationships and uncertainty in supplied evidence. Evaluate a claim or process against explicit criteria and evidence. Solve with a visible model choice, substitutions, units, appropriate precision and a physical interpretation.

Use diagrams deliberately. Force arrows should begin on the isolated object and name real interactions. Ray angles should be measured from a normal. Circuit diagrams should use standard symbols and unambiguous nodes. Graphs should label variables and units. A clear figure can earn its place by preventing an assumption from remaining hidden.

Before submitting, use this checklist:

• The system and positive direction are stated where relevant.
• The equation's conditions match the context.
• Every substituted value has compatible units.
• Conservation of charge, energy or momentum has been checked where applicable.
• The final result includes direction, sign and appropriate precision.
• The conclusion distinguishes measured evidence from inference.
• A limitation explains how confidence or the result is affected.

Sources

• QCAA Physics subject page
• QCAA Physics 2025 v1.3 syllabus
• QCAA Physics formula and data book
• OpenStax University Physics

Finished reading? Practise this topic free

Open Physics past questions with this Unit 2 topic carried into the question bank, then save your progress for the next review.

Practise this topic free. Free to start. No payment details are required. Exact question coverage depends on the available past-paper syllabus mapping.